Tag Archives: gear and shaft

China high quality Small Flange and Output Shaft Size Worm Gear Reducers Gearbox components of gearbox

Product Description

SMRV series worm-gear speed reducer is a new-generation of products developed by our company with combination of advanced by technology both at home and abroad.

Characteristics:
(1)Large output torque
(2) Safe, reliable, economical and durable
(3) Stable transmission, quiet operation
(4) High heat-radiating efficiency, high carrying ability
(5) Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio
(6) Mechanical gearboxes are widely used in the sectors,like foodstuff, ceramics, and chemical manufacturing, as well as packing, printing, dyeing and plastics
 Technical data:
(1) Motor input power:0.06kw-15kw
(2)  Output torque:4-2320N.M
(3)  Speed ratio of worm gear peed reducer: 5/10/15/20/25/30/40/50/60/80/100
(4)  With IEC motor input flange: 56B14/71B14/80B5/90B5
 Materials:
(1)   NMRV571-NMRV090: Aluminium alloy housing
(2)   NMRV110-150: Cast iron housing
(3)   Bearing: CHINAMFG bearing & Homemade bearing
(4)   Lubricant: Synthetic & Mineral
(5)  The material of the worm mandrel is HT250, and the worm ring gear is ZQSn10-1.
(6)  With high quality homemade bearings, assembled CHINAMFG oil seals & filled with high quality lubricant.
Operation&mantenance
(1)When worm speed reducer starts to work up to200-400 hours, its lubricant should be replaced.
(2)The gearbox need to replace the oil after 4000 hours.
(3)Worm reduction gearbox is fully filled with lubricant oil after finshed assembly.
(4)Lubricanting oil should be kept enough in the casing and checked at a fixed time.
 Color:
(1)   Blue / Light blue
(2)   Silvery White
 Quality control
(1)  Quality guarantee: 1 year
(2)  Certificate of quality: ISO9001:2000
(3)   Every product must be tested before sending

Motor power  Model speed ratio output speed output toruqe
0.06kw 1400rpm NMRV030 5 280rpm  2.0N.M
NMRV030 7.5 186rpm  2.6N.M
NMRV030 10 140rpm  3.3N.M
NMRV030 15 94rpm  4.7N.M
NMRV030 20 70rpm  5.9N.M
NMRV030 25 56rpm  6.8N.M
NMRV030 30 47rpm  7.9N.M
NMRV030 40 35rpm  9.7N.M
NMRV030 50 28rpm 11.0N.M
NMRV030 60 24rpm 12.0N.M
NMRV030 80 18rpm 14.0N.M
0.09kw 1400rpm NMRV030 5 280rpm  2.7N.M
NMRV030 7.5 186rpm  3.9N.M
NMRV030 10 140rpm  5.0N.M
NMRV030 15 94rpm  7.0N.M
NMRV030 20 70rpm  8.8N.M
NMRV030 25 56rpm 10.0N.M
NMRV030 30 47rpm 12.0N.M
NMRV030 40 35rpm 14.0N.M
NMRV030 50 28rpm 17.0N.M
NMRV030 60 24rpm 18.0N.M
0.12kw 1400rpm NMRV030 5 280rpm  3.6N.M
NMRV030 7.5 186rpm  5.2N.M
NMRV030 10 140rpm  6.6N.M
NMRV030 15 94rpm  9.3N.M
NMRV030 20 70rpm 12.0N.M
NMRV030 25 56rpm 14.0N.M
NMRV030 30 47rpm 16.0N.M
NMRV030 40 35rpm 19.0N.M
NMRV030 50 28rpm 22.0N.M
0.18kw 1400rpm NMRV030 5 280rpm  5.3N.M
NMRV030 7.5 186rpm  7.7N.M
NMRV030 10 140rpm 10.0N.M
NMRV030 15 94rpm 14.0N.M
NMRV030 20 70rpm 18.0N.M
NMRV030 25 56rpm 20.0N.M
NMRV030 30 47rpm 24.0N.M

Shipping Cost:

Estimated freight per unit.

To be negotiated
Application: Industry
Hardness: Hardened
Type: Worm and Wormwheel
Customization:
Available

|

Customized Request

worm gearbox

Can a Worm Gearbox be Used for High-Speed Applications?

Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:

  • Efficiency: Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
  • Heat Generation: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
  • Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
  • Backlash: Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.

While worm gearboxes are more commonly used in applications requiring high torque and moderate speeds, they may not be the best choice for high-speed scenarios. If high-speed operation is a requirement, other gearbox types such as helical, spur, or planetary gearboxes are often better suited due to their higher efficiency, lower heat generation, and reduced wear at elevated speeds.

worm gearbox

Materials Used for Worm Gears

Worm gears are manufactured using a variety of materials to meet different application requirements. Some commonly used materials for worm gears include:

  • Steel: Steel is a popular choice for worm gears due to its strength, durability, and wear resistance. It can handle heavy loads and is often used in industrial applications.
  • Bronze: Bronze offers good lubricity and is commonly used for the worm gear (worm) component. It provides effective wear resistance and works well in applications where quiet operation is essential.
  • Cast Iron: Cast iron is known for its high strength and durability. It’s often used for worm gears in applications where shock loads or heavy-duty conditions are expected.
  • Aluminum: Aluminum worm gears are lightweight and corrosion-resistant, making them suitable for applications where weight reduction is important.
  • Plastic: Some worm gears are made from plastic materials such as nylon or acetal. These materials are often chosen for their self-lubricating properties and quiet operation.
  • Composite Materials: Composite materials can offer a combination of properties, such as lightweight construction and corrosion resistance. They can be suitable for specific applications.

The choice of material depends on factors such as the application’s load, speed, operating environment, and required performance characteristics. It’s important to consider these factors when selecting the appropriate material for worm gears to ensure optimal performance and longevity.

worm gearbox

Can a Worm Gearbox Provide High Torque Output?

Yes, a worm gearbox is capable of providing high torque output due to its unique design and principle of operation. Worm gears are known for their high torque multiplication capabilities, making them suitable for applications that require significant torque transfer.

The torque output of a worm gearbox is influenced by several factors:

  • Lead Angle: The lead angle of the worm affects the mechanical advantage of the gear system. A larger lead angle can result in higher torque output.
  • Worm Diameter: A larger diameter worm can offer increased torque output as it provides more contact area with the gear.
  • Gear Ratio: The gear ratio between the worm and the gear determines the torque multiplication factor. A higher gear ratio leads to higher torque output.
  • Lubrication: Proper lubrication is essential to minimize friction and ensure efficient torque transmission.
  • Material and Quality: High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.

Due to their ability to provide high torque output in a compact form factor, worm gearboxes are commonly used in various industrial applications, including heavy machinery, construction equipment, conveyor systems, and more.

China high quality Small Flange and Output Shaft Size Worm Gear Reducers Gearbox components of gearbox China high quality Small Flange and Output Shaft Size Worm Gear Reducers Gearbox components of gearbox
editor by CX 2023-10-07

China Helical Worm Gear Speed Reducer Gearbox S Type with Flange Mounted Solid Shaft and Aq Connector gearbox worm box

Merchandise Description

Helical Worm Equipment Motor (S Sort) 

Enter Configurations

  Motor mounted
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Enter (Advertisement connection)

Output Configurations

 

Solid output shaft

Solid output shaft with flange

Hollow output shaft

Hollow output shaft with flange

Variants of the Helical Worm Gear Device Collection S / SF / SA / SAF

Foot- or flange-mounted

B5 or B14 flange-mounted

Reliable shaft or hollow shaft

Hollow shaft with keyed relationship, shrink disk, splined hollow shaft, or Torque Arm

Principal Characteristic
The straightforward style can make for price-usefulness.  Use the S collection gear models to implement easy tasks in your equipment or plant applications. The linear energy transmission makes the helical-worm equipment models specifically tranquil in procedure. The blend with a helical equipment stage significantly increases the performance compared to pure worm equipment models.
Specification

Design

Shaft Dia.

mm

Horizontal Centre Height mm

External Flange Dia.

 mm

Electricity

(kw)

Ratio

(i)

Nominal Torque

(Nm)

Strong Shaft

Hollow Shaft

S/SF/SA/SAF37

ф20

ф20

88

 –

.12-.fifty five

24-204

100

S/SF/SA/SAF47

ф25

ф30 / ф25

one hundred

one hundred sixty

.18-.seventy five

24-204

150

S/SF/SA/SAF57

ф30

ф35 / ф30

112

two hundred

.75-1.5

24-204

250

S/SF/SA/SAF67

ф35

ф45 /ф40

a hundred and forty

200

.75-three

24-285

460

S/SF/SA/SAF77

ф45

ф60 / ф50

a hundred and eighty

250

.seventy five-7.five

24-385

1200

S/SF/SA/SAF87

ф60

ф70 / ф60

225

350

one.1-11

24-389

2000

S/SF/SA/SAF97

ф70

ф90 / ф70

280

450

one.5-eighteen.five

24-389

3500
               
               
               

Firm Profile
Packing
Scenarioes

FAQ
Q1: I want to buy your merchandise, how can I spend?
A: You can spend by means of T/T(30%+70%), L/C ,D/P and so on. 

Q2: How can you assure the quality?
A: A single year’s guarantee against B/L day. If you fulfill with high quality problem, make sure you send out us photos or online video to check out, we assure to deliver spare parts or new goods to substitute. Our assure not include inappropriate operation or wrong specification assortment. 

Q3: How we decide on models and requirements?
A: You can electronic mail us the sequence code (for case in point: RC sequence helical gearbox) as well as need specifics, such as motor energy,output velocity or ratio, service aspect or your software…as much info as feasible. If you can source some photos or drawings,it is great. 

This fall: If we never locate what we want on your web site, what should we do?
A: We supply 3 possibilities:
1, You can electronic mail us the photos, drawings or descriptions particulars. We will attempt to layout your products on the basis of our
standard versions.
2, Our R&D section is specialist for OEM/ODM items by drawing/samples, you can ship us samples, we do customized layout for your bulk buying.
three, We can develop new goods if they have excellent industry. We have previously developed many items for unique making use of successful, such as special gearbox for agitator, cement conveyor, sneakers machines and so on. 

Q5: Can we purchase 1 computer of each merchandise for quality screening?
A: Yes, we are glad to settle for demo buy for top quality testing.

Q6: How about your merchandise shipping time?
A: Generally for 20’container, it will take 25-thirty workdays for RV series worm gearbox, 35-40 workdays for helical gearmotors.

US $150-180
/ Piece
| 		5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Foot/Flange Mounted
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:
Available

|

Customized Request

###

Input Configurations
  Motor mounted
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Input (AD connection)
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
 –
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500
               
               
               
US $150-180
/ Piece
| 		5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Foot/Flange Mounted
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:
Available

|

Customized Request

###

Input Configurations
  Motor mounted
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Input (AD connection)
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
 –
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500
               
               
               

Is a worm gear reducer gearbox right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China Helical Worm Gear Speed Reducer Gearbox S Type with Flange Mounted Solid Shaft and Aq Connector gearbox worm boxChina Helical Worm Gear Speed Reducer Gearbox S Type with Flange Mounted Solid Shaft and Aq Connector gearbox worm box
editor by czh 2023-02-01

China high quality Small Flange and Output Shaft Size Worm Gear Reducers Great quality

Merchandise Description

SMRV collection worm-gear velocity reducer is a new-era of goods produced by our business with combination of advanced by engineering both at property and overseas.

Attributes:
&lpar1)Big output torque
&lpar2) Secure, trustworthy, inexpensive and durable
&lpar3) Secure transmission, tranquil operation
&lpar4) Substantial warmth-radiating performance, large carrying capacity
&lpar5) Blend of 2 single-phase worm gear pace reducers, assembly the demands of tremendous speed ratio
&lpar6) Mechanical gearboxes are extensively used in the sectors,like foodstuff, ceramics, and chemical producing, as well as packing, printing, dyeing and plastics
 Technical information:
&lpar1) Motor enter energy:.06kw-15kw
&lpar2)  Output torque:4-2320N.M
&lpar3)  Velocity ratio of worm equipment peed reducer: 5&sol10&sol15&sol20&sol25&sol30&sol40&sol50&sol60&sol80&sol100
&lpar4)  With IEC motor input flange: 56B14&sol71B14&sol80B5&sol90B5
 Materials:
&lpar1)   NMRV571-NMRV090: Aluminium alloy housing
&lpar2)   NMRV110-150: Solid iron housing
&lpar3)   Bearing: NSK bearing & Do-it-yourself bearing
&lpar4)   Lubricant: Synthetic & Mineral
&lpar5)  The substance of the worm mandrel is HT250, and the worm ring equipment is ZQSn10-1.
&lpar6)  With high good quality do-it-yourself bearings, assembled NAK oil seals & crammed with substantial quality lubricant.
Operation&man10ance
&lpar1)When worm velocity reducer starts to perform up to200-400 hours, its CZPT should be replaced.
&lpar2)The gearbox need to exchange the oil after 4000 several hours.
&lpar3)Worm reduction gearbox is completely loaded with CZPT oil after finshed assembly.
&lpar4)Lubricanting oil must be stored adequate in the casing and checked at a fastened time.
 Color:
&lpar1)   Blue &sol Gentle blue
&lpar2)   Silvery White
 Quality handle
&lpar1)  Quality promise: 1 12 months
&lpar2)  Certificate of good quality: ISO9001:2000
&lpar3)   Every merchandise have to be tested before sending

Motor power  Model velocity ratio output pace output toruqe
.06kw 1400rpm NMRV030 5 280rpm  2.0N.M
NMRV030 7.five 186rpm  2.6N.M
NMRV030 ten 140rpm  3.3N.M
NMRV030 15 94rpm  4.7N.M
NMRV030 20 70rpm  5.9N.M
NMRV030 25 56rpm  6.8N.M
NMRV030 30 47rpm  7.9N.M
NMRV030 forty 35rpm  9.7N.M
NMRV030 fifty 28rpm eleven.0N.M
NMRV030 60 24rpm twelve.0N.M
NMRV030 eighty 18rpm 14.0N.M
.09kw 1400rpm NMRV030 5 280rpm  2.7N.M
NMRV030 7.5 186rpm  3.9N.M
NMRV030 ten 140rpm  5.0N.M
NMRV030 15 94rpm  7.0N.M
NMRV030 20 70rpm  8.8N.M
NMRV030 twenty five 56rpm ten.0N.M
NMRV030 30 47rpm twelve.0N.M
NMRV030 forty 35rpm fourteen.0N.M
NMRV030 50 28rpm 17.0N.M
NMRV030 60 24rpm eighteen.0N.M
0.12kw 1400rpm NMRV030 5 280rpm  3.6N.M
NMRV030 7.5 186rpm  5.2N.M
NMRV030 10 140rpm  6.6N.M
NMRV030 15 94rpm  9.3N.M
NMRV030 20 70rpm twelve.0N.M
NMRV030 twenty five 56rpm fourteen.0N.M
NMRV030 30 47rpm sixteen.0N.M
NMRV030 forty 35rpm 19.0N.M
NMRV030 50 28rpm 22.0N.M
0.18kw 1400rpm NMRV030 five 280rpm  5.3N.M
NMRV030 seven.5 186rpm  7.7N.M
NMRV030 ten 140rpm 10.0N.M
NMRV030 15 94rpm fourteen.0N.M
NMRV030 twenty 70rpm eighteen.0N.M
NMRV030 25 56rpm 20.0N.M
NMRV030 thirty 47rpm 24.0N.M

Appropriate angle gearboxes (worm and planetary gears) are sturdy and can be used for 90° turns. An inline reducer (parallel shaft and planetary) is an excellent matching motor with large enter speeds, or when equipment motor efficiency is important. Get in touch with our technical revenue personnel to assist decide which transmission remedy is ideal for you.
Equipment reducers, also called reducers, arrive in several transmission designs and are developed to multiply torque and reduce input speed to a preferred output speed. The main advantage of inline gearboxes is their ability to keep management in applications involving higher rotational speeds. Their efficiency and ability to provide higher input speeds with nominal backlash make inline reducer gearboxes perfect for a wide assortment of movement control applications

China high quality Small Flange and Output Shaft Size Worm Gear Reducers Great quality

China Professional Right-Angle Shaft Type Gear Box of Spiral Bevel Gears for General Applications with High Performance and High Efficiency. Engineering

Product Description

Right-angle shaft type gear box of spiral bevel gears for standard purposes with higher efficiency and substantial efficiency. Extensive variation ranging from small to big potential. Smooth rotation and silent travel possible, and Simple installation. A entire lineup from little-measurement designs to massive-dimension designs, for a broad variety of apps. These extremely compact bevel gearboxes are made for the transmission of rotary mechanical electrical power by means of ninety degrees or split electricity from 1 enter generate to two or three output drives. They use precision lower spiral bevel gears to produce a smooth and quiet transmission with an efficiency of up to 98%. Whilst the standard style is appropriate for most purposes our engineering staff can custoCZPT models to meet up with the most arduous of conditions no matter whether within, exterior, on land or subsea.

 

How Does A Compact Bevel Gearbox Function?

Compact Cubic Gearboxes Movies For Buyers Orders

* Malaysia consumers bevel ninety degree gearbox 1:1 ratio at 300rpm 600rpm 900rpm 1200rpm 1500rpm velocity Video clip:

* Germany client spiral-bevel gears 1:1 ratio appropriate angle gearbox with four-way(a few output shafts) Video clip:

*  Nigeria consumer 1:1 90° correct angle hefty responsibility gear box, heavy spiral bevel gear box 3 shafts Video clip:

* Thailand client bevel gear bins 3:1 ratio JTP140 ninety degree transmission gearbox 3 to 1 Movie:

* Malaysia consumer 4 ten-ton jacks and four JTP140 gearboxes for motorized worm gear screw raise table Movie:

* Australia consumer screw jack self locking technique with inverted 2.5 ton screw jacks and JTP90 gearboxes Online video:

*  France customer four shaft gearbox 1:1 ratio correct angle gearbox four way 22mm ninety degree gear drives Movie:

*  Indonesia customer reduction gearbox 2:1 ratio correct angle spiral bevel gear generate Video:

*  United states of america buyer large speed right angle push 1:1 ratio 90 degree high speed equipment containers Online video:

*  Mexico shopper JTP65 miniature spiral bevel gearbox 1:1 ratio a few way testing Online video:

*  A single enter two output gear boxes JTP90 bevel gears ninety equipment box dual output Video:

*  Brazil customer JTP110 Two-way Three-way Right Angle Gearbox 1:1 Ratio Video clip:

*  India Faridabad clients JTP110 angel gearbox travel 1:1 22mm shaft ninety degree angle equipment bins Video clip:

* Thailand client 90 degree equipment travel box,correct ange 1:1 ratio equipment reducer Video:

* Canada buyer acme screw jack 2 ton travel nut with JTP90 right angle gearbox and security coupling Movie:

* Slovenia shopper 90 degree gearbox 1:1 ratio, right angle gearbox 1 to 1 ratio Video clip:

* Brazil client bevel 90 degree gearbox 1:1 check movie before shipment Online video:

* Turkey client best good quality twenty five kn 30×6 spindle rotating trapezoidal thread screw jacks 360mm Movie:

* United states client inverted screw jack 5 ton with 32mm shaft angle gearbox for 3 factors raise system Video:

* Malaysia customer servo motor pushed electrical screw elevate method with lifting techniques equipment Video:

* France client 5ton screw system for handbook desk carry/worm equipment hand crank raise lower platform Movie:

* Belgium Geel shopper miniature motorized system elevate,screw carry methods mini jacks gearboxes Video clip:

* Queensland Australia consumer 6-jacks screw jacking systems with equipment for desk lift method Video clip:

* a hundred% safety packages & 100% standard exporting plywood circumstances supplies films:

Cargo and Packing Pictures 
Delivery:
one. Ocean freight: seaport to seaport, price phrases CIF, FOB, EXW, CFR etc.
two. Air freight: airport to airport, cost conditions EXW, CRF and many others.
3. Air courier: DHL, FEDEX, UPS, TNT doorway to door shipment, cost conditions DDU, CPT and so on.
Packing: 
one hundred% standard exporting plywood instances. 
Notice: International Exporting Regular Picket Materials with Free Fumigation.

CZPT Positive aspects
1. Global regular materials for All CZPT brand name items. We insist on selecting brand suppliers to provide the higher top quality raw materials to manage the generating procedure. Optimization constantly the creation procedures, inspecting in every single hyperlink and taking care of generation website.
2. one hundred% quality assured with double top quality inspections. The top quality inspection by good quality inspectors from processing to finished merchandise as the 1st time. Ahead of packing, the corresponding revenue engineers must examine the orders subsequent the paper drawings, get quantities and special markings in the bill or sales contracts as the next time. Soon after that, fill in the inspection report with signature and firm stamp.
three. one hundred% protection transportation. Packing with robust standard export plywood instances resources (free of charge fumigation), internal packing with epe foams to avert products swaying and outer packing with iron sheets and fasteners to fasten the packages.
4. Internationl income engineers have expert expertise and expertise on our common products and support. They have ample ability to remedy the standard specialized problem immediately whatever by mobile phone, on-line chat, face to confront communications.
5. All the normal merchandise with 2nd CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Designs (Action, STP, Product, IGS, PRT and CATParT formats).
six. Customized design accessible, OEM support obtainable, Free of charge engineering advice, Cost-free rates accessible and Client label offered.
7. Inspection equipments contain motor with inverter travel technique, height adjustmemt motorized lifting program, coordinate measuring equipment, outside micrometers, inside of micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, electronic sounds meters, industrial infrared thermometers, digital speed measuring instruments, digital multimeters, and higher precision clamp electronic ammeter and so forth. 
eight. Processing with modern advanced machines this sort of as CNC gear hobbing equipment, CNC flank grinding devices, CNC cylindrical grinding machines, multi-axis CNC milling equipment, CNC lathes and other people equipments.

Concluded Tasks
one. Theatrical remedies stage and orchestra platform lifts initiatives. Consumers are from France, Australia, Netherlands, United Kingdom, Spain and Canada. 
two. Hydroelectric electricity station initiatives and water conservancy tasks. Consumers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, United States and United Kingdom. 
3. Aircraft servicing platforms and docking methods initiatives. Consumers are from Pakistan, Singapore and United Arab Emirates.  
four. Solar panel tracking program projects. Customers are from Spain, India and Canada. 
5. Bolted metal storage tanks and silos lifting answers. Consumers are from South Africa, United States, Mexico, Russian Federation, Brazil and Vietnam. 
6. Dish antenna elevation and azimuth positioning tasks. Clients are from Singapore, Malaysia and United States. 
seven. Railway wagon assignments. Clients are from South Africa. 
eight. Beverage can production strains. Customers are from Netherlands, United States, Thailand and Indonesia. 
9. Steel factories manufacturing strains. Consumers are from Iran, United States and Turkey. 
ten. Continuous PU sandwich panel manufacturing strains. Customers are from Thailand and United Kingdom.  

CZPT Buyers Locations(Nations)
1. American Countries: United States, Mexico, Canada, Chile, Xihu (West Lake) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. European International locations: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
three. Asian International locations: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
four. Oceanian Nations around the world: Australia, New Zealand, Fiji.
five. African Nations: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania. 

CZPT Products List
one. Handbook Screw Jacks, Electrical Screw Jacks.
two. Screw Jacks Sequence: JT collection acme screw jacks, JTC collection cubic screw jacks, JTW series device screw jacks, JTM collection worm screw jacks, JTB sequence ball screw jacks, JTD series cubic ball screw jacks, JSS sequence stainless metal screw jacks, JTS collection bevel gear screw jacks, Non-common series screw jacks. 
three. Bevel Gearboxes Collection: JT collection bevel gearboxes, JTP sequence cubic bevel gearboxes, JTA series aluminum bevel gearboxes, JTH collection hollow shaft bevel gearboxes, BSS sequence stainless steel bevel gearboxes.  
4. Lifting Methods and Methods Equipment: two-jacks programs, a few-jacks techniques, 4-jacks techniques, 6-jacks programs, eight-jacks programs. Equipment cover couplings, universal joints, cardan shafts, connecting shafts, electrical motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod conclude bearings, stop nuts, limit switches, basic safety nut, travel nuts, linear shafts and bearings, linear guides and bearings, telescopic spring handles, bellows boot, protective tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and place indicators etc.
five. Electric powered Linear Actuators Series: Parallel large obligation linear actuators, In-line weighty duty linear actuators.
six. Geared Motors and Pace Reducers Sequence: helical gearmotors R series, helical bevel gearmotors K series, parallel shaft helical gearmotors F series, helical worm gearmotors S series, small AC gear motor sequence and worm equipment motor reducer series.

Make contact with Information
CZPT Business Co.,Ltd (VAT No.: 9144190007026567X3, registered Funds 500000CNY) is a leading company and supplier of Screw Jacks (Mechanical Actuators), Bevel Gearboxes, Lifting Methods, Electrical Linear Actuators, Gearmotors and Speed Reducers, and Other folks Linear Movement and Electricity Transmission Items in China. We are Alibaba, Made-In-China and SGS (Serial NO.: QIP-ASI192186) audited maker and provider. We also have a strict quality method, with senior engineers, knowledgeable expert workers and practiced sales groups, we constantly supply the large quality equipments to fulfill the customers electro-mechanical actuation, lifting and positioning wants. CZPT Industry assures top quality, dependability, performance and benefit for today’s demanding industrial applications.
Internet site (English): screw-jacks
Web site (English): screw-jacks
Web site (Chinese): screw-jacks

These compact, lightweight, low backlash inline gear reducers have been at first designed for encoder applications. They are also suited for numerous other generate programs. Encoder equipment reducers have a really reduced moment of inertia at the shaft enter and are rated for enter speeds up to 3000 rpm. Two body measurements are available with gear ratios from 4.ninety six:1 to 3600:1. Our encoder gearbox sync pads are available from stock.

China Professional Right-Angle Shaft Type Gear Box of Spiral Bevel Gears for General Applications with High Performance and High Efficiency. Engineering

China OEM Small Flange and Output Shaft Size Worm Gear Reducers OEM

Solution Description

SMRV series worm-gear velocity reducer is a new-era of items produced by our firm with blend of sophisticated by techCZPT the two at home and abroad&interval

Qualities&colon
&lpar1&rparLarge output torque
&lpar2&rpar Safe&comma reputable&comma affordable and durable
&lpar3&rpar Secure transmission&comma peaceful procedure
&lpar4&rpar Large warmth-radiating effectiveness&comma substantial carrying capability
&lpar5&rpar Combination of two single-action worm gear speed reducers&comma assembly the requirements of sCZPT speed ratio
&lpar6&rpar Mechanical gearboxes are extensively employed in the sectors&commalike foodstuff&comma ceramics&comma and chemical producing&comma as nicely as packing&comma printing&comma dyeing and plastics
 Technical information&colon
&lpar1&rpar Motor input electrical power&colon0&period06kw-15kw
&lpar2&rpar  Output torque&colon4-2320N&periodM
&lpar3&rpar  Pace ratio of worm equipment peed reducer&colon 5&sol10&sol15&sol20&sol25&sol30&sol40&sol50&sol60&sol80&sol100
&lpar4&rpar  With IEC motor input flange&colon 56B14&sol71B14&sol80B5&sol90B5
 Materials&colon
&lpar1&rpar   NMRV571-NMRV090&colon Aluminium alloy housing
&lpar2&rpar   NMRV110-150&colon Cast iron housing
&lpar3&rpar   Bearing&colon NSK bearing & Selfmade bearing
&lpar4&rpar   Lubricant&colon Synthetic & Mineral
&lpar5&rpar  The material of the worm mandrel is HT250&comma and the worm ring equipment is ZQSn10-1&time period
&lpar6&rpar  With high high quality homemade bearings&comma assembled NAK oil seals & stuffed with higher quality lubricant&period
Procedure&mantenance
&lpar1&rparWhen worm pace reducer starts to operate up to200-400 hours&comma its lubricant ought to be replaced&period of time
&lpar2&rparThe gearbox need to have to change the oil following 4000 hours&period
&lpar3&rparWorm reduction gearbox is completely stuffed with lubricant oil soon after finshed assembly&time period
&lpar4&rparLubricanting oil need to be kept adequate in the casing and checked at a fastened time&period
 Color&colon
&lpar1&rpar   Blue &sol Mild blue
&lpar2&rpar   Silvery White
 Quality handle
&lpar1&rpar  High quality assure&colon 1 yr
&lpar2&rpar  Certificate of quality&colon ISO9001&colon2000
&lpar3&rpar   Every item should be tested before sending

Motor power  Design velocity ratio output pace output toruqe
&period06kw 1400rpm NMRV030 five 280rpm  2&period0N&periodM
NMRV030 seven&period5 186rpm  2&period6N&periodM
NMRV030 ten 140rpm  3&period3N&periodM
NMRV030 15 94rpm  4&period7N&periodM
NMRV030 twenty 70rpm  5&period9N&periodM
NMRV030 twenty five 56rpm  6&period8N&periodM
NMRV030 30 47rpm  7&period9N&periodM
NMRV030 forty 35rpm  9&period7N&periodM
NMRV030 fifty 28rpm eleven&period0N&periodM
NMRV030 sixty 24rpm twelve&period0N&periodM
NMRV030 80 18rpm fourteen&period0N&periodM
&period09kw 1400rpm NMRV030 5 280rpm  2&period7N&periodM
NMRV030 7&period5 186rpm  3&period9N&periodM
NMRV030 ten 140rpm  5&period0N&periodM
NMRV030 15 94rpm  7&period0N&periodM
NMRV030 twenty 70rpm  8&period8N&periodM
NMRV030 25 56rpm ten&period0N&periodM
NMRV030 30 47rpm 12&period0N&periodM
NMRV030 40 35rpm 14&period0N&periodM
NMRV030 50 28rpm seventeen&period0N&periodM
NMRV030 sixty 24rpm eighteen&period0N&periodM
0&period12kw 1400rpm NMRV030 5 280rpm  3&period6N&periodM
NMRV030 seven&period5 186rpm  5&period2N&periodM
NMRV030 10 140rpm  6&period6N&periodM
NMRV030 fifteen 94rpm  9&period3N&periodM
NMRV030 twenty 70rpm 12&period0N&periodM
NMRV030 twenty five 56rpm fourteen&period0N&periodM
NMRV030 thirty 47rpm 16&period0N&periodM
NMRV030 forty 35rpm 19&period0N&periodM
NMRV030 fifty 28rpm 22&period0N&periodM
0&period18kw 1400rpm NMRV030 five 280rpm  5&period3N&periodM
NMRV030 seven&period5 186rpm  7&period7N&periodM
NMRV030 ten 140rpm ten&period0N&periodM
NMRV030 fifteen 94rpm 14&period0N&periodM
NMRV030 20 70rpm eighteen&period0N&periodM
NMRV030 25 56rpm 20&period0N&periodM
NMRV030 30 47rpm 24&period0N&periodM

Gearboxes are mechanical products that help push systems maintain the best possible pace and torque for apps. Also known as gearboxes and equipment drives, they minimize the rotational velocity of the enter shaft by a specific percentage and increase the power delivered to the output shaft by the same proportion. Ratio multipliers increase the deceleration and torque offered by the reducer by a specified ratio and are ideal for parallel installations. Mounting bases, torque arms and flange couplings are add-ons used with the reducer. They are typically utilized in purposes where the reducer is not straight related to the push mechanism.

China OEM Small Flange and Output Shaft Size Worm Gear Reducers OEM

in Kottayam India sales price shop near me near me shop factory supplier China Professional Made Gear and Shaft manufacturer best Cost Custom Cheap wholesaler

in Kottayam India sales price shop near me near me shop factory supplier China Professional Made Gear and Shaft manufacturer best Cost Custom Cheap wholesaler

Our solution assortment also handles locking assemblies (clamping aspects/locking gadget), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod finishes and yokes. our products are offering well in the American, European, South American and Asian markets. More importantly, we make unique elements in accordance to supplied drawings/samples and warmly welcome OEM inquiries.

Product attributes

we can generate EPT shaft,step shaft,main shaft,wind turbine shaft,flanges,supporting roller,solid ring,EPTT and other forging and casting areas.

EPTnical processing:

The Method As Adhere to: ingot #8594 warmth #8594 forging #8594 warmth remedy(normalizing tempering) #8594 inspection #8594 rough machining #8594 UT #8594 2nd heat therapy #8594 finishing machining #8594 inspection .
EPTT EPTT: UT,MT,RT,PT,chemical composition take a look at,mechanical house check,and so forth.
Warmth Treatment method: Normalize,Quenching,Tempering,Anealled.
Surface Remedy: painting,plating,poEPTTng,black oXiHu (West EPT) Dis.de,clear anti-rust oil.
Inspection: In addition to our in-property inspecion, you could also decide on a third party inspection.
StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd: EPTT,ASTM,AEPTE,API,JIS,DIN,BS,EN,KS,UNI,SABS,GOST.
Certification: 1, Raw material certificate(substance chemical compositon)
2, Warmth treatment method sheet report
three, Dimension inspection report
four, UT take a look at report
EPTT: Seaworthy plywood packaged on stell pallets or as customer’s request
Delivery Date: Determined by the quantity and dimensions of products. Typically we management the massive diameter rings’ delivery time inside 5 weeks right after we EPT your formal buy.
Competitive Advantage: EPTT management and administration to the EPTT make process, incXiHu (West EPT) Dis.Hu (West EPT) Dis. ingot smelting,forging, warmth therapy, machining and strictly final inspection prior to shipping.

EPTnical parameters:

EPT Alloy steel,EPTT metal,Carburizing steel,Quenched and tempered steel
Heat treatment Normalizing,Annealing,Quenching ampTempering, Floor Quenching,Situation hardening
Machining CNC Turning,CNC Milling,CNC Dull,CNC Grinding,CNC Drilling
EPT Machining EPT Hobbing,EPT Milling,CNC EPT Milling,EPT Slicing,Spiral EPT chopping,EPT Chopping
Inspection EPTT Composition Examination,EPT Test,Penetration Take a look at,Radiographic Check,EPTic Test,Tensile Power Check,EPTEPTTct Check,Hardness Check,Dimension Take a look at
Module of EPT eight-a hundred and twenty
EPT Grinding MAX. Module 24
Diameter of Shaft: MAX. two 200mm
Length of Shaft MAX. thirteen 000mm
Diameter of EPT Wheel MAX.13 000 mm
Diameter of Spiral EPT MAX. two 200 mm
Size of EPT Shaft MAX. 5 000 mm

tem

Machining parts

certification

ISO9001:2008

Machining equipments

CNC cEPTTr, CNC milling EPTT, CNC turning EPTT, CNC lathes, lathe, 4 aXiHu (West EPT) Dis.s EPTT and so on.

EPTs

EPTT, Metal, Stainless metal, Brass, Copper, Bronze, Abdominal muscles, Laptop, PO, POM, Nylon, Teflon and so on.

Area complete

Anodize, Plating, Brushing, PoEPTTng, Blackened, PowEPTTcoating, Sandblasting, Laser engraving and many others.

Inspection EPT

CMM, Projection, Calipers, EPT caliper, Thread EPT caliper, Pin gauge, Caliper gauge, Pass meter, Go meter etc.

Drawing structure

PDF,dwg,and so on

No. Software sequence Representative metal type Description
one EPT EPTTry series

AISI4150,AISI4140,AISI4130,

30CrMo,4145H

EPT entire body, valve block,

drill pipe, drill collar
two Instrument mildew sequence

1.2714,5CrMnMo,5CrNiMoV,

1.2738,1.2311,one.2312

Die casting mould, forging mildew,

plastic mould
3 EPTT sequence 52100,GCr15,SUJ2

EPTT ring, rolling bearing,

piston rod
four Maritime sequence

4140,42CrMo,SCM440,

709M40

 Marine add-ons
five Auto series

SAE8620,20CrNiMo,

SNCM220

 Crankshaft, EPT
6 EPT-obligation EPTT series

40CrNiMo,SNCM439,

SAE4340,EN24

Port EPTT areas,

helicopter rotor shaft, turbine shaft
seven EPT EPTTry collection

655M13,826M40,

25CrMo

EPT little bit, carburizing and

crushing EPTTry
8 Wind EPTT EPT series

18CrNiMo7-six, 17CrNiMo6, 1.6582,one.6587,SAE8620

Meet the design daily life of

more than 20 several years
nine Wind EPTT spindle sequence 34CrNiMo6,817M40

Satisfy the layout lifestyle of

much more than twenty several years
ten Nitriding sequence

20MnCr5,38CrMoAl,

31CrMoV9

EPT, EPT molding EPTT

screw / barrel,precision components
eleven Pressure vessel series 15CrMo,13CrMo4-4

EPTT, petrochemical hydrogenation

vessel equipment
twelve EPTlurgical roll series

21CrMoV511,W1.7225,

EN19,709M40

 Metal rolling roll

EPT bearing shaft 5mm/8mm linear Shaft

Item Description

StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd sound shaft: (also harded chrome bars)

SF SFC
EPT: GCr15 bearing metal /ck45/40cr/stainless steel/
Hardness: EPTC58-64 degree
Precision: G6/f7/h6…
Roughness: Considerably less than one.5um (Rmax)
Hardness: .eight-2mm layer
Straightness: 100mm less than 5um
Plating thickness of the difficult Luo: One .015-.571mm

Merchandise Description

Warmth take care of

Quenching amp Tempering, Carburizing amp Quenching, EPT-frequency Hardening, EPTTitriding and many others.
Ending

Blacking, PoEPTTng, Anodization, Chrome Plating, Zinc Plating, Nickel Plating
Length

5000mm, max
Outside Diameter

1000mm, max
Roughness

Ra .4 mum or larger
Programs

Enter Shaft, Output Shaft

Item Description

very best promoting five aXiHu (West EPT) Dis.s cnc machining OEM EPTTl EPT pinion shaft

EPTty EPT Manufactory!

Surface area: as your need

EPT: metal / EPT / brass / iron / zinc / alloy

Any other materials and dimension is dependent on customers’ demand.

Use: EPTTry / furniture / toy / woodboard / wall

EPT method: casting areas

EPT: casting EPTT

Tests gear: projector

Tolerance: /-.05MM

We are ready to offer with sample for good quality and operate screening.

We are ISO 9001: 2008 accredited company.

Element Name

Main Shaft 4 Speed EPT

Element Variety

WG2210050050

EPTT

Black

EPTT

Legitimate

EPT

Metal

Bundle

EPT EPTTs

Condition

Spherical

Sample

Available

Port

EPTEPTTn EPTT

Function

Principal Shaft Reverse EPT

Dimension

StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd

MOQ

1 Piece

EPTT Type

HW19712

Origin

ZheJiang , EPTT

Variety of EPT

In accordance Specific EPTtity

EPT Time

According Certain EPTtity

Specs

one.This Main Shaft Idle EPT WG2210050050 is utilised on HW19712 EPTT Assembly
2. The two real and oem are available, higher high quality kinds also are in inventory
three.The dimensions is stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd and the condition is Round
4.And we also can offer the EPTT areas for HW19712 EPTT assembly

Product Description

1. Grade: AISI4340 ,AISI4140,42CrMo S45C,100CR6,34CRNIMO6 316l.304l
2. Measurement: D100-800,Length1000-6000,client drawings and requirement
three. StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd: GB,JIS
4. Certification: ISO9001, PED ,SGS

Item Identify

Forged EPT Equipment

EPT

CARBON EPT ,STAINLESS EPT,ALLOY EPT

EPTT

brigEPTT area

StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd

DIN GB ISO JIS BA EPTT AEPTE16.five

Quality

AISI4340 ,AISI4140,42CrMo S45C,100CR6,34CRNIMO6 316l.304l.321.304H

Max Diameter

1500mm

Max Length

15m

Utilised

building market EPTTry

Advantages

EPT with Customers’ Styles – EPT Machining amp Warmth Therapy Abilities – Stringent EPTT EPTT – Prompt Shipping – Expertise in Cooperation with EPTT five hundred Firms

Programs

EPT –EPTlurgy –EPTT Era –SuXiHu (West EPT) Dis.Hu (West EPT) Dis. –Cement Plant –Port EPTTry –Oil and organic –Papermaking –OEM EPT scenario –EPTT EPTT

We are a direct OEM factory to manufacture big non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPTT elements in accordance to drawings with far more than twenty five several years
experience.

Our energy items are as underneath.

one. EPT areas for mining business these kinds of as reduction EPTs, EPT hoister and head sheave

two. OEM creation eEPTTly for large EPTs and shafts are provided according to consumer drawings.

three. EPT amp EPTT, Machining, Heat Remedy provider are presented.

four.Engineering seek advice from and repair provider are provided.

OEM casting loafer EPT wheel shaft main spur EPT shaft

The cost is for reference only. We will give you a quotation according to the drawing needs and solution specifications. If you need to have to know the specifics, you can contact and inquire.
The EPT shaft produced from steel, utilized for hefty industry, the substance of EPT shaft is metal which has EPT good quality.The EPT shaft processing lathing, milling,grinding, drilling, Our manufacturing unit has the edge of processing, so there is a promise of precision and pace about EPTn shaft prior to EPTT, the EPT shaft want to be inspected by our quality workers, then packed and sent out to client.

Solution name OEM casting loafer EPT wheel shaft major spur EPT shaft
EPT ZG45,ZG42CrMo,35CrMo,ect
Framework EPTT or forging
Approach Lathing, milling,grinding
Max.diameter 2000mm
Max.length 8000mm
Max.tolerance plusmn0.3
Kind In accordance to drawings
Bundle Seaworthy EPTT
Delivery time 30-ninety days
Certification SGS,ISO

EPTT introduction

HangEPT Evon Engineering EPTT,LTD is a manufacture of bearings, worm EPTrs, slewing bearings, EPTs, shaft and engineering areas. EPT bearings, worm EPTrs, slewing bearings, EPTs, shafts prove every single working day to be EPTTant structural and connection elements, they can be commonly used in the liftinEPTTransport EPTTry, mining EPTTry, development EPTTry, port hoisting EPTTry, port oil transfer equipment, onshore and offshore crane, excavator, concrete EPTT, paper EPTT, plastic and rubber EPTT, weave EPTT, cement EPTT, metal EPTT, electric EPTT EPTT, wind EPTT generator, other construction and industry EPTTs or equipment and other big rotary products.
The goods manufactured by EPT Engineering Co are largely exported to the nations of the European EPT, United states of america, the Middle EPT, the South American, the Africa, Austrilian and Asia locations and the Russian Federation, in the approach of cooperation with our consumers, we have made it a basic principle to build a long lasting and gratifying partnership with our clients by providing productive support with the prime quality and minimizing the generation EPT.
XiHu (West EPT) Dis.hu (West EPT) Dis.g for constant motivation to the top quality of goods and customer service, Evon Engineering attaches fantastic EPTTance to study and deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment to ensure EPT solution good quality and provider from its institution. The good quality of EPT products are primarily based on the outstanding EPTTist and technical level of constructors and experts, extremely certified operators, experiences generation workers.

The organization title: HangEPT Evon Engineering EPTT,ltd
Tackle: No three Lianmeng Highway, EPTTnXiHu (West EPT) Dis. Area, HangEPT EPTT, ZheJiang Province, EPTT
Tel: -379-64516701
Fax -379-64516702

Internet site:

in Kottayam India sales price shop near me near me shop factory supplier China Professional Made Gear and Shaft manufacturer best Cost Custom Cheap wholesaler

in Kottayam India sales price shop near me near me shop factory supplier China Professional Made Gear and Shaft manufacturer best Cost Custom Cheap wholesaler