Merchandise Description
NMRV 130 one hundred fifty Worm Speed Reducer Transmission Gearboxes
Attributes:
one) Aluminum alloy die-casted gearbox
2) Compact construction will save mounting room
3) Extremely accurate
4) Runs ahead and backward
5) High overload capability
six) Stable transmission with diminished vibration and sounds
Traits:
1. Higher quality aluminum alloy quadrate case .
two. Substantial performance.
3. Modest measurement, compact constructure and mild fat.
4. Combination of 2 one-phase worm equipment velocity reducers, meeting the requirements of super pace ratio.
Technological Data:
one. Enter electricity: .06kW-15kW
2. Output torque: 7.8-1195N.m
3. Speed ratio: (5-a hundred) 5, 7.5, 10, fifteen, 20, twenty five, thirty, 40, fifty, sixty, eighty, a hundred
4. Adapt for IEC, NEMA, SERVO
Materials:
one. From RV25 up to RV105: Aluminium alloy housing.
two. From RV110 to RV150: Cast iron housing.
three. Seal: CZPT Seal from ZheJiang
four. Bearing :home made Bearing
Colour:
1. RAL5571
two. Blue
three. Silver
Quality management:
1.High quality promise: 1 year
two.Certification of quality: ISO9001:2008
3.Each and every product should be analyzed prior to packing
Standard Specialized knowledge:
Dimension amount:25,thirty,forty,fifty,sixty three,75,90,110,130,a hundred and fifty
Ratio:1/100-1/5000
Colour:blue,silver,RAL5571 color
Materials:housing -casting iron- HT200-250#/aluminum worm gear-KK alloy worm-20CrMnTi with carburizing and quenching,surface area hardness is fifty eight-62HRC shaft-chromium metal-forty five#
Packing: Internal pack: use plastic bag a Interior pack: use plastic bag and foam box, outer pack: carton or wooden situation 1set/bag/carton or based mostly on customer’s requestbearing: CZPT & Home made bearing
Seal: CZPT seal from ZheJiang
Input electrical power: .25kw,.37kw,.55kw,.75kw,1.1kw,1.5kw,2.2kw,3.0kw,4.0kw,5.5kw,7.5kw
Lubricant:Synthetic & Mineral
IEC flange:56B5,63B5,71B5,80B5,90B5,100B5,112B5,132B5
Output type: strong shaft,hollow shaft fat: .7-87.8KGSapplication: In industrial machine:foodstuff Things,ceramics,chemical,packing,printing,dyeing,woodworking,glass and plastics
Guarantee:1 12 months
HangZhou CZPT Business Co., Ltd. is a specialized supplier of a complete variety of chains, sprockets, gears, equipment racks, v belt pulley, timing pulley, V-belts, couplings, machined areas and so on.
Because of to our sincerity in offering very best services to our customers, understanding of your requirements and overriding sense of responsibility towards filling ordering requirements, we have acquired the trust of purchasers throughout the world. Obtaining accrued valuable knowledge in cooperating with international clients, our goods are offering properly in the American, European, South American and Asian markets. Our items are made by contemporary computerized machinery and gear. In the meantime, our goods are produced in accordance to high high quality standards, and complying with the global superior common standards.
With many years’ encounter in this line, we will be trusted by our advantages in competitive price tag, 1-time delivery, prompt reaction, on-hand engineering help and great right after-sales providers.
In addition, all our generation procedures are in compliance with ISO9001 expectations. We also can design and style and make non-regular merchandise to fulfill customers’ particular requirements. High quality and credit score are the bases that make a corporation alive. We will offer greatest providers and large quality merchandise with all sincerity. If you want any information or samples, remember to get in touch with us and you will have our shortly reply.
FAQ:
Q1: Are you buying and selling firm or company ?
A: We are factory.
Q2: How lengthy is your delivery time and cargo?
one.Sample Direct-moments: typically 10 workdays.
2.Manufacturing Lead-times: twenty-40 workdays soon after receiving your deposit.
Q3. What is your phrases of payment?
A: T/T thirty% as deposit, and 70% prior to shipping and delivery.
This fall: What is your positive aspects?
one. Producer,the most aggressive price and great quality.
two. Ideal specialized engineers give you the best help.
three. OEM is offered.
4. Prosperous stock and quick shipping.
Q5. If you cannot find the item on our internet site,what do you subsequent?
Make sure you send out us inquiry with product photos and drawings by e mail or other approaches and we are going to check.
|
US $10-60 / Piece | |
10 Pieces (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated| Freight Cost Calculator |
|---|
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Cycloidal |
###
| Samples: |
US$ 120/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
|
US $10-60 / Piece | |
10 Pieces (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated| Freight Cost Calculator |
|---|
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Cycloidal |
###
| Samples: |
US$ 120/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
What is a worm gear reducer?
A worm gear reducer is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer can increase the output torque of the engine according to the gear ratio. This type of gear reducer is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer
The hollow shaft worm gear reducer is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducers are usually used in combination with helical gear reducers. The latter is mounted on the input side of the worm gear reducer and is a great way to reduce the speed of high output motors. The gear reducer has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducers are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducers can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducers use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducers. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer
Worm gear reducers can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducers great for space-saving applications. They also have low initial costs.
Worm gear reducers are one of the most popular types of speed reducers. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by czh 2022-12-02
