Item Description
Scorching Sales
Solution Description
China CZPT JD400/J400/JT400A l HangZhou small diesel CZPT marine and gearbox
Info of J400A / JD400A / JT400A
J400 Modle
| Housing:SAE 0.1 | Flange:14″,16″,18″ | |
| LWH | 713×950×890mm | Net :820kgs |
| Nominal coefficient | Accurate coefficient | Ratio (horsepower/r/m) |
| two:01 | two.042:1 | .45 |
| 2.5:1 | 2.476:1 | .45 |
| three:01 | three.000:1 | .45 |
| three.5:one | three.474:1 | .forty five |
| four:01 | three.491:1 | .38 |
| five:01 | 4.730:1 | .twenty five |
JD400 Modle
| Housing:SAE 0.1 | Flange:fourteen”,16″,18″ | |
| LWH | 801×1571×1066mm | Net :1050kgs |
| Nominal coefficient | Accurate coefficient | Ratio (horsepower/r/m) |
| four:01 | 4.000:1 | .forty five |
| 4.3:1 | four.227:1 | .45 |
| four.5:1 | 4.476:one | .45 |
| 4.7:one | 4.seven hundred:1 | .forty five |
| 5:01 | 5.000:one | .forty five |
| five.5:one | five.474:1 | .4 |
| six:01 | five.890:one | .38 |
JT400
| Housing:SAE 0.one | Flange:fourteen”,16″,18″ | |
| LWH | 832×1052×1160mm | Net :1300kgs |
| Nominal coefficient | Accurate coefficient | Ratio (horsepower/r/m) |
| 6:01 | six.108:1 | .forty five |
| 6.5:one | six.513:one | .45 |
| 7:01 | six.957:one | .forty five |
| 7.5:1 | 7.445:one | .forty five |
| 8:01 | 7.950:one | .415 |
| eight.5:1 | 8.526:one | .385 |
| nine:01 | nine:01 | .36 |
| nine.5:1 | 9.474:1 | .333 |
We are seasoned transmission dealers and provide a wide variety of transmissions, an vital component of numerous generate techniques. Gearboxes can be employed to minimize or enhance speed, enhance torque, reverse or modify the direction of a drive shaft. Gearboxes are also known as equipment drives, pace reducers, equipment motors, speed reducers and gear reducers.
Gearboxes and reducers are enclosed mechanical reduction devices typically employed in today’s automated manage programs to command torque from your motors and complete other motion-associated tasks. A gearbox permits you to boost torque although minimizing the speed of your primary mover output shaft. The output shaft of the gearbox rotates at a slower pace than the enter shaft. This creates a mechanical edge, rising torque. Conversely, your gearbox can be set in reverse, offering elevated shaft velocity and lowered torque. Two typical transmission configurations are straight and right angle. On the internet designs generally consist of helical or spur gears, planetary gears, cycloidal mechanisms, or harmonic turbines. Appropriate-angle designs usually use worm or helical gear drives, however, hybrid drives are also offered. Gearmotors blend an enclosed equipment established with an electric powered motor to increase torque and efficiency whilst decreasing speed. Whilst extra friction, inertia, or sharp load adjustments for limited-time period operation of the actuator can cause issues, they provide a long operating lifestyle by avoiding overloading. Various equipment ratios, speeds and torques are offered to support enhance overall performance and decrease prospective issues. Look through to locate the proper gearbox and reducer for your automation task.
