Wet Magnetic Separator Mining Machine for Separation Iron

Wet Magnetic Separator Mining Machine for Separation Iron

ONE:Application
XCRS Drum Wet weak magnetic separator is mostly employed in metallic benefication laboratory. It makes use of damp technique for magnetic separation of fine-grained sturdy magnetic ores in the kind of parallel flow. XCRS Drum Wet weak magnetic separator is little in size, gentle in excess weight, straightforward in operation and hassle-free in upkeep. The tools is not suitable for benefication assessments with corrosive liquids.

Structural Introduction and Characteristics
XCRS Drum Soaked weak magnetic separator is composed of the principal body of the magnetic separator and drum power supply. The principal entire body of magnetic separator mostly contains: 1: Frame 2: magnetic drum 3: ore trough(hopper) 4: spray pipe 5: transmission gadget six: feeding ore box.

The drum electrical power supply is a single silicon bridge rectifier energy supply whose output is altered by a voltage regulator handle.

one. Frame: welded by angle steel, which is the help part of the complete equipment.

two. CZPTic drum: It is geared up with 4 excitation coils and magnet cores, and an extra magnetic pole with out excitation coil is put in on its discharging side to facilitate ore unloading. These 5 poles kind admirer-shaped fastened on the mandrel, the mandrel is fastened on the frame through bearing bushes, and the cylinder is made of non-magnetic content aluminum and stainless metal, and the admirer-shaped coil is manufactured of non-magnetic substance. The relationship final results in the alternation of the magnetic field polarity on the palm of every single magnetic pole and the flip of ore particles up to 180 degrees per passing magnetic pole. Underneath the motion of magnetic stirring, the top quality of magnetic products can be improved. At 1 stop of the mandrel, a square outward construction can be used to rotate the magnetic poles in the drum all around the axis, so as to satisfy the requirements of distinct minerals.

three.Transmission unit: Mounted on the bottom aspect of the frame, in buy to lessen the center of gravity of the complete machine, the transmission component is composed of 3 AC motors, worm gears and worm gearboxes.The output of the gearbox is driven to the drum by means of the chain, which drives the drum to rotate (the magnetic pole does not rotate with it). The pace of the drum is 25 rpm. The direction of rotating power of magnetic drum is constant with that of ore feeding.

4.ore trough(hopper):

It is welded by aluminium and stainless steel plate and fixed on the frame by screw. An overflow outlet is organized at the feeding side of the ore trough to preserve the liquid amount substantial, and a concentrate nozzle is arranged at the reduce component of the focus trough for obtaining ore.

five. spray pipe:

A copper pipe with holes set up on the rack is connected with the indoor water resource for washing focus on the magnetic drum. The sprinkler angle can be adjusted by rotating the spray pipe.

6. Feed the ore box:

The box physique is welded by stainless steel plate. Its perform is to make sure the uniformity of ore feeding.

About Us:

Far more specifics,make sure you will not wait to Make contact with us,you can send us inquiry as beneath,we will reply you within 24hours.
 
 

Wet Magnetic Separator Mining Machine for Separation Iron