Single-Tool Holder CNC Lathe Machine

Single-Tool Holder CNC Lathe Machine

Bench Turning Lathe CZPT T300/914

Swing more than mattress: 300mm
Swing over hole: 430mm
Spindle Gap: 38mm
Max. Length of work piece: 914mm

This machine has the subsequent features:
1, CZPT floor and hardened bedways
two, The spindle is supported with precision roller bearings
3, Head stock gears are manufactured of higher quality steel ground and hardened
4, Simple operating speed change levers
5, Detachable hole is supplied for more substantial diameter work
six, Spindle pace selection 70-2000 RPM
7, A few differnet lengths mattress are accessible
eight, Straightforward working equipment box has numerous feeds and thread cutting function
nine, ASA D1-four camlock spindle nose
ten, With or without having cupboard according to requirenent

Regular accent
1. Sleeves MT 5/three
two. Facilities (Lifeless middle MT. three Alloy centre MT. two)
3.3 Jaw chuck 1 plece
four. V-belt(A762 2 pieces)
five. Metric modifying gears (m=1.25…eight parts)
6. Resource box and tools 1 set 1 established
seven. Oil gun one piece
Added CZPT(at extra cost)
one.4-jaw chuck(200mm) one piece(eight”)
two. Experience plate(300mm) one piece(twelve”)
three. Constant rest one piece
4. Follow relaxation 1 piece
5. Foot stand
six. Foot brake (five.six specific purchasing)

  SPECIFICATION T300/914
  SPECIFICATION METRIC INCH
  Max.swing over bed 300mm 12″
  Max.swing over gap 430mm 17″
  Max.length of work piece 914mm 36″
  Max.length of turning 760mm 30″
  Hole through Spindle 38mm 1 ½
  Taper of spindle bore M.T.No.5
  Range of spindle speeds(9 steps) 60-1500r.p.m.
  Taper of quill sleeve M.T.No.3
  Metric threads can be cut (29 kinds) .two-4.5mm  
  Inch threads can be cut (40 kinds)   four-112T.P.I.
  Pitches of three feed leadscrews 8T.P.I.
  Longitudinal feed per revolution of spindle(40 kinds) .571-.791mm/rev .0011-.571″/rev
  Cross feed per revolution of spindle(40 kinds) .571-.268mm/rev .0004-.5716″/rev
  Max.longitudinal travel of saddle 800mm 31 one/2”
  Max.travel of cross slide 175mm 6 seven/8”
  Max.travel of top slide 95mm 3 3/4”
  Max.travel of tailstock sleeve 100mm four”
  Motor horse power one.5HP(1.1KW)
  Motor frequency 60Hz or 50Hz
  Motor voltage 380/415V 115/230V or 110/220V
  Overall dimensions(L×W×H) 1700×750×1270mm 70”×29 five/8”×50”
  Net weight 420kg 926l.b.

Single-Tool Holder CNC Lathe Machine