China Spiral Gearbox for Paper Pulp Making agnee worm gearbox

Merchandise Description

The gearbox  is usually utilized for lower-pace and large-torque transmission gear. The power of the electrical motor, inner combustion engine or other higher-velocity operation is achieved by way of the gear of the input shaft of the reducer meshing with the massive equipment on the output shaft. The ratio of the amount of tooth is the transmission ratio.There 4 type gearbox for paper mill,pls check out the adhere to informations:

Worm/spiral bevel gearbox reducer

one. Worm/spiral bevel equipment reducer is made in accordance with global specialized requirements and has a higher technological material.
two. It saves place, is trustworthy and durable, with substantial overload capability, and the energy can get to far more than 200KW.
three. Low strength consumption, excellent efficiency, and the reducer effectiveness is as higher as ninety five%.
four. K spiral bevel equipment reducer has reduced vibration, minimal sounds and high power preserving.
five. The spiral bevel gear reducer is made of substantial-good quality steel substance, rigid cast iron box, and the floor of the equipment is higher-frequency heat taken care of.

six. After precision processing, the reducer that kinds the transmission assembly of helical gears, bevel gears and bevel gears is equipped with a variety of kinds of motors, forming an electromechanical integration, which completely guarantees the high quality traits of the geared motor items.

two. Performance attributes:
1. Vertical output, compact construction, hard tooth surface area transmission torque, large-precision gears ensure steady perform, reduced sound and long daily life.
2. Set up strategy: foot installation, hollow shaft set up, flange set up, torque arm installation, small flange set up.
three. Input manner: motor immediate connection, motor belt link or input shaft, link flange enter.
4. Output manner: hollow shaft output or sound shaft output, the common performance is ninety four%.
5. Merge with R collection to get bigger velocity ratio.

3. Technical parameters:

Speed ratio selection: fundamental variety 5.36~197.37, K/R combination type can reach 32625
Torque selection: two hundred~50000 Nm
Electrical power variety: .eighteen~200 kW

Helical gear hardened gear reducer

one. R collection helical equipment hardened gear reducer is created in accordance with worldwide specialized requirements and has a high technological articles
two. Hard tooth area reducer will save space, is dependable and resilient, has substantial overload ability, and the electricity can reach 132KW
three. Low strength consumption, exceptional overall performance, and the reducer efficiency is as high as 95% or far more
4. Low vibration, reduced sounds and substantial vitality conserving
five. The helical equipment reducer is produced of high-high quality forged steel material, rigid forged iron box, and the area of the equipment is substantial-frequency heat treated
six. Soon after precision machining to make certain shaft parallelism and positioning bearing requirements, the reducer forming the helical gear transmission assembly is equipped with a variety of sorts of motors, merged into mechatronics, which fully guarantees the top quality characteristics of the geared motor merchandise.

2.Attributes:
one. Modest offset output, compact construction, highest use of cabinet room, the 2nd and 3rd amounts are in the very same cabinet.
two. It adopts integral casting box, which has very good structural rigidity, which is easy to improve the strength of the shaft and the existence of the bearing.
three. Set up method: foot installation, flange set up with huge and small flanges, simple to choose.
four. With solid shaft output, the common performance is ninety six% for the next phase, 94% for the third stage, and eighty five% for the R/R mixture.
five. The RM series specifically developed for mixing can bear larger axial and radial forces.

3. Technical parameters:

Pace ratio assortment: R fundamental variety 3.33~289.74, RX sort 1.3~8.65, R/R merged type can attain 27001
Torque range: R fundamental variety 85~18000 Nm, RX kind twenty~1680 Nm
Power selection: R basic kind .18~160 kW, RX type .18~132 kW

 

Parallel shaft helical gear reducer

1. The F sequence parallel shaft helical equipment reducer is created in accordance with worldwide specialized specifications and has a substantial technological articles.
two. It saves area, is dependable and tough, has higher overload potential, and the energy can achieve far more than 90KW.

3. F parallel shaft helical gear reducer has reduced vitality intake, superior functionality and performance as higher as ninety five%.
4. Parallel shaft helical equipment reducer has reduced vibration, low sounds and high energy saving. It is manufactured of higher-quality steel substance, rigid solid iron box, and the surface area of the gear is substantial-frequency warmth treated.
five. Following precision machining, the shaft parallelism and positioning accuracy are ensured. All of this constitutes the gear transmission assembly. The reducer is geared up with different motors, forming a mechatronics, which entirely guarantees the top quality traits of the geared motor items.
 
2.Characteristics:
1. Parallel output, compact construction, large transmission torque, steady procedure, lower sounds and prolonged life.
two. Set up approach: foundation installation, hollow shaft installation, flange installation, torque arm set up, small flange installation.
three. The rotation direction of the enter and output of the fundamental two-stage is the same, and the a few-phase is reverse yet another consultation is essential for F/R blend.
4. Output method: hollow shaft output or reliable shaft output.
5. Typical efficiency: 96% for stage two, 94% for degree three, and eighty five% for F/R combination.

 three. Technological parameters:

Pace ratio variety: simple sort 3.81~281.71, F/R mix kind can reach 31434
Torque variety: 200~18000 Nm
Power range: .18~two hundred kW

Helical gear worm gear reducer

  1. The S sequence helical equipment worm reducer has a large technological content. It has a combination of helical equipment and worm gear for built-in transmission, which increases the torque and effectiveness of the device. This collection of products have total specifications, broad pace variety, very good versatility, adapt to numerous installation strategies, risk-free and reliable overall performance and long life, and have applied international standards.
  2. The surface of the human body has a warmth dissipation result, robust vibration absorption, reduced temperature increase and reduced noise.
  3. The device has great sealing overall performance and sturdy adaptability to the operating setting.
  4. The helical gear worm equipment reducer has substantial transmission precision, which is specially ideal for doing work in situations with recurrent starting. It can be linked to various reducers and geared up with a variety of types of motor drives. It can be installed in a ninety diploma transmission procedure.
place.
  5. The crucial elements of the S helical equipment reducer are manufactured of highly use-resistant materials and have undergone particular warmth treatment method. They have the qualities of large machining precision, stable transmission, tiny dimension, large carrying capability, and lengthy lifestyle.
  6. The helical equipment reducer can be geared up with different types of motors, forming an electromechanical integration, which fully ensures the high quality traits of the product.
 
two.Characteristics:
  1. Blend of helical equipment and worm gear, compact structure and massive reduction ratio.
  2. Installation strategy: foot set up, hollow shaft installation, flange installation, torque arm set up, tiny flange set up.
  3. Input manner: motor direct relationship, motor belt relationship or enter shaft, relationship flange enter.
  4. Typical efficiency: reduction ratio of 7.5-69.39 is 77% 70.forty three-288 is sixty two% S/R blend is fifty seven%.
  5. Merge with R series to get bigger pace ratio.
 

 3. Technical parameters:

Speed ratio assortment: simple type 9.ninety six~244.74, S/R blend sort can reach 8608
Torque range: 43~4200 Nm
Energy assortment: .eighteen~22 kW

Packing 

Make contact with us to have far more details about “Gearbox “

US $23-1,100
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Paper Mill
Function: Distribution Power, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Customization:

###

Speed ratio range: basic type 5.36~197.37, K/R combination type can reach 32625
Torque range: 200~50000 Nm
Power range: 0.18~200 kW

###

Speed ratio range: R basic type 3.33~289.74, RX type 1.3~8.65, R/R combined type can reach 27001
Torque range: R basic type 85~18000 Nm, RX type 20~1680 Nm
Power range: R basic type 0.18~160 kW, RX type 0.18~132 kW

###

Speed ratio range: basic type 3.81~281.71, F/R combination type can reach 31434
Torque range: 200~18000 Nm
Power range: 0.18~200 kW

###

Speed ratio range: basic type 9.96~244.74, S/R combination type can reach 8608
Torque range: 43~4200 Nm
Power range: 0.18~22 kW
US $23-1,100
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Paper Mill
Function: Distribution Power, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Customization:

###

Speed ratio range: basic type 5.36~197.37, K/R combination type can reach 32625
Torque range: 200~50000 Nm
Power range: 0.18~200 kW

###

Speed ratio range: R basic type 3.33~289.74, RX type 1.3~8.65, R/R combined type can reach 27001
Torque range: R basic type 85~18000 Nm, RX type 20~1680 Nm
Power range: R basic type 0.18~160 kW, RX type 0.18~132 kW

###

Speed ratio range: basic type 3.81~281.71, F/R combination type can reach 31434
Torque range: 200~18000 Nm
Power range: 0.18~200 kW

###

Speed ratio range: basic type 9.96~244.74, S/R combination type can reach 8608
Torque range: 43~4200 Nm
Power range: 0.18~22 kW

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<brworm reducer

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China Spiral Gearbox for Paper Pulp Making     agnee worm gearboxChina Spiral Gearbox for Paper Pulp Making     agnee worm gearbox
editor by czh 2023-01-02