China OEM Spiral Worm Gearbox for Paper Pulp manufacturer

Merchandise Description

The gearbox  is normally used for lower-speed and high-torque transmission products. The electrical power of the electrical motor, inner combustion motor or other large-speed operation is accomplished through the equipment of the enter shaft of the reducer meshing with the big equipment on the output shaft. The ratio of the variety of teeth is the transmission ratio.There four sort gearbox for paper mill,pls check out the comply with informations:

Worm/spiral bevel gearbox reducer

one. Worm/spiral bevel equipment reducer is manufactured in accordance with worldwide complex needs and has a high technological material.
two. It will save room, is trustworthy and resilient, with substantial overload capacity, and the energy can get to much more than 200KW.
3. Reduced energy use, excellent functionality, and the reducer effectiveness is as higher as 95%.
four. K spiral bevel equipment reducer has reduced vibration, reduced sound and large power preserving.
five. The spiral bevel equipment reducer is created of higher-top quality metal substance, rigid cast iron box, and the floor of the equipment is large-frequency warmth dealt with.

six. After precision processing, the reducer that forms the transmission assembly of helical gears, bevel gears and bevel gears is equipped with numerous varieties of motors, forming an electromechanical integration, which fully ensures the good quality attributes of the geared motor merchandise.

two. Overall performance qualities:
one. Vertical output, compact structure, difficult tooth floor transmission torque, high-precision gears make certain steady perform, minimal sounds and extended lifestyle.
2. Installation technique: foot set up, hollow shaft set up, flange set up, torque arm installation, tiny flange installation.
3. Input method: motor direct connection, motor belt link or input shaft, relationship flange input.
4. Output manner: hollow shaft output or strong shaft output, the regular efficiency is ninety four%.
5. Blend with R sequence to get greater speed ratio.

3. Technological parameters:

Speed ratio variety: simple sort 5.36~197.37, K/R blend type can reach 32625
Torque variety: 200~50000 Nm
Electrical power selection: .18~two hundred kW

Helical equipment hardened gear reducer

1. R collection helical gear hardened gear reducer is manufactured in accordance with worldwide complex requirements and has a substantial technological content
2. Hard tooth surface reducer saves place, is reliable and durable, has higher overload potential, and the electricity can achieve 132KW
three. Low vitality intake, excellent overall performance, and the reducer performance is as substantial as 95% or far more
four. Minimal vibration, reduced sound and large energy conserving
5. The helical equipment reducer is created of substantial-top quality solid steel materials, rigid forged iron box, and the surface area of the equipment is large-frequency warmth handled
six. After precision machining to ensure shaft parallelism and positioning bearing demands, the reducer forming the helical equipment transmission assembly is geared up with numerous varieties of motors, merged into mechatronics, which fully ensures the high quality characteristics of the geared motor products.

2.Functions:
1. Small offset output, compact framework, optimum use of cabinet place, the next and third amounts are in the very same cupboard.
2. It adopts integral casting box, which has very good structural rigidity, which is simple to boost the sCZPT of the shaft and the daily life of the bearing.
3. Installation strategy: foot set up, flange installation with huge and tiny flanges, easy to pick.
four. With sound shaft output, the average effectiveness is 96% for the 2nd stage, 94% for the third stage, and 85% for the R/R blend.
five. The RM series specially made for mixing can bear greater axial and radial forces.

3. Complex parameters:

Pace ratio variety: R basic sort 3.33~289.74, RX sort 1.3~8.65, R/R combined type can attain 27001
Torque selection: R fundamental variety eighty five~18000 Nm, RX type twenty~1680 Nm
Electrical power variety: R simple variety .eighteen~a hundred and sixty kW, RX kind .18~132 kW

 

Parallel shaft helical equipment reducer

one. The F sequence parallel shaft helical gear reducer is made in accordance with worldwide technical requirements and has a higher technological content.
2. It will save area, is reliable and tough, has high overload capacity, and the electrical power can attain a lot more than 90KW.

three. F parallel shaft helical gear reducer has reduced energy usage, outstanding overall performance and effectiveness as higher as ninety five%.
four. Parallel shaft helical gear reducer has low vibration, lower noise and higher energy conserving. It is produced of higher-good quality metal substance, rigid forged iron box, and the surface area of the gear is higher-frequency heat handled.
5. Following precision machining, the shaft parallelism and positioning precision are ensured. All of this constitutes the gear transmission assembly. The reducer is outfitted with various motors, forming a mechatronics, which fully ensures the good quality characteristics of the geared motor products.
 
2.Features:
one. Parallel output, compact construction, massive transmission torque, stable operation, minimal noise and long existence.
2. Set up method: base installation, hollow shaft set up, flange installation, torque arm set up, modest flange installation.
3. The rotation course of the enter and output of the simple two-phase is the same, and the three-phase is reverse yet another session is needed for F/R blend.
four. Output manner: hollow shaft output or strong shaft output.
5. Typical efficiency: 96% for stage two, ninety four% for degree a few, and eighty five% for F/R mix.

 three. Technological parameters:

Pace ratio variety: basic type 3.81~281.71, F/R mix variety can reach 31434
Torque assortment: two hundred~18000 Nm
Electricity assortment: .18~two hundred kW

Helical equipment worm gear reducer

  1. The S collection helical gear worm reducer has a large technological content. It has a blend of helical gear and worm equipment for built-in transmission, which enhances the torque and effectiveness of the device. This series of products have full specs, broad velocity range, very good versatility, adapt to various set up strategies, protected and reliable efficiency and long lifestyle, and have implemented global standards.
  2. The surface area of the physique has a heat dissipation result, robust vibration absorption, lower temperature rise and lower sounds.
  3. The equipment has excellent sCZPT efficiency and sturdy adaptability to the operating surroundings.
  4. The helical equipment worm equipment reducer has higher transmission precision, which is especially ideal for functioning in occasions with regular starting up. It can be linked to numerous reducers and geared up with different varieties of motor drives. It can be set up in a 90 diploma transmission procedure.
placement.
  5. The crucial elements of the S helical gear reducer are produced of highly use-resistant resources and have undergone unique heat treatment. They have the attributes of large machining precision, stable transmission, tiny dimensions, big carrying potential, and prolonged lifestyle.
  6. The helical gear reducer can be outfitted with various sorts of motors, forming an electromechanical integration, which entirely assures the high quality characteristics of the merchandise.
 
2.Features:
  1. Mixture of helical gear and worm equipment, compact framework and large reduction ratio.
  2. Installation approach: foot installation, hollow shaft set up, flange installation, torque arm installation, little flange installation.
  3. Input mode: motor direct relationship, motor belt connection or input shaft, relationship flange input.
  4. Regular efficiency: reduction ratio of 7.5-sixty nine.39 is 77% 70.43-288 is sixty two% S/R mixture is fifty seven%.
  5. Merge with R series to get greater pace ratio.
 

 three. Technological parameters:

Pace ratio range: standard type 9.96~244.74, S/R blend kind can get to 8608
Torque variety: 43~4200 Nm
Power selection: .eighteen~22 kW

Packing 

Make contact with us to have more specifics about “Gearbox “

Proper angle gearboxes (worm and planetary gears) are robust and can be utilized for 90° turns. An inline reducer (parallel shaft and planetary) is an best matching motor with substantial input speeds, or when gear motor performance is important. Get in touch with our specialized revenue workers to support figure out which transmission answer is ideal for you.

China OEM Spiral Worm Gearbox for Paper Pulp     manufacturer