Bench Turning Lathe Machine, Single-Tool Holder CNC Lathe

Bench Turning Lathe Machine, Single-Tool Holder CNC Lathe

Bench Turning Lathe CZPT T330/750 T330/a thousand T360/750 T360/a thousand

Swing above bed: 330/360mm
Swing over cross slide: 198/212mm
Spindle Gap: 38mm
Mattress length: 1248/1655/1363/1655mm
Admits between: 750/1000mm

This machine has the pursuing characteristics:
1, CZPT ground and hardened bedways
2, The spindle is supported with precision roller bearings
three, Head stock gears are created of high quality steel floor and hardened
four, Effortless functioning velocity change levers
5, Detachable hole is presented for greater diameter perform
six, Spindle velocity variety 70-2000 RPM
7, 3 differnet lengths mattress are accessible
8, Effortless running equipment box has a variety of feeds and thread chopping operate
9, ASA D1-4 camlock spindle nose
10, With or with no cabinet according to requirenent

Common accessory
1. Sleeves MT five/3
2. Centers (Useless middle MT. 3 Alloy centre MT. two)
3.three Jaw chuck one plece
4. V-belt(A762 2 items)
5. Metric altering gears (m=1.twenty five…8 pieces)
six. Device box and equipment one established one established
seven. Oil gun one piece
Added CZPT(at extra value)
1.four-jaw chuck(200mm) one piece(8″)
two. Face plate(300mm) one piece(12″)
three. Regular rest 1 piece
four. Follow relaxation one piece
five. Foot stand
six. Foot brake (five.6 special ordering)

MCZPTLS T330/750 T330/1000 T360/750 T360/one thousand
Swing over bed 330mm(13″) 360mm(fourteen”)
Swing over cross slide 198mm(7-twenty five/32″) 212mm(eight-one/six”)
Swing in gap diameter 476mm(18-3/4″) 491mm(9-1/3″)
Swing in length 210mm(8-1/four”) 210mm(8-one/four”)
Center height 166mm(six-1/two”) 166mm(six-1/two”)
Admits between 750mm(30″) 1000mm(40″) 750mm(30″) 1000mm(forty”)
Bed width 187mm(seven-3/8″) 187mm(7-three/8″)
Bed length 1248mm(forty nine-1/8″) 1655mm(65-one/eight”) 1363mm(fifty three-two/three”) 1655mm(sixty five-1/eight”)
Spindle bore 38mm(1-1/2″) 38mm(one-1/two”)
Spindle nose D1-4″ or A2-four” D1-four” or A2-4″
Taper in nose NO.5 morse NO.5 morse
Taper in sleeve NO.3 morse NO.3 morse
Speeds number 8 or 16(pole changeable motor) (optional) 8 or 16(pole changeable motor) (optional)
Speeds range 70-2000r.p.m.or 35-2000r.p.m. 70-2000r.p.m.or 35-2000r.p.m.
(2 speed motor) (2 speed motor)
Cross slide travel 160mm(six-5/16″) 118mm(4-five/sixteen”)
Compound rest travel 68mm(2-11/sixteen”) 68mm(two-11/16″)
Lead screw thread 8T.P.I. or 3mm pitch 8T.P.I. or 3mm pitch
Feed rod diameter 19mm(3/four”) 19mm(3/4″)
Cutting tool max section 16mm×16mm(5/8″×5/eight”) 16mm×16mm(five/8″×5/eight”)
Threads imperial pitches 36 Nos.eight-112 T.P.I. or 36 Nos.eight-112 T.P.I. or
(34 Nos.four-56T.P.I) (34 Nos.four-56T.P.I)
Threads metric pitches 28 Nos..two-5mm pitch or (26 Nos..four-7mm pitch) 28 Nos..two-5mm pitch or (26 Nos..four-7mm pitch)
Threads diametral pitches 36 Nos.8-112 D.P 36 Nos.8-112 D.P
Threads module pitches 22 Nos..2-3 M.P. 22 Nos..two-3 M.P.
Longitudinal feeds imperial 36 Nos..0019-.5713″/Rev.or 36 Nos..0019-.5713″/Rev.or
(32 Nos..002-.548″/Rev) (32 Nos..002-.548″/Rev)
Longitudinal feeds metric 36 Nos..050-.696″/Rev.or 36 Nos..050-.696″/Rev.or
(32 Nos..052-.392mm/Rev) (32 Nos..052-.392mm/Rev)
Cross feeds imperial 36 Nos..0006-.0094″/Rev.or 36 Nos..0006-.0094″/Rev.or
(32 Nos..007-.0187″/Rev) (32 Nos..007-.0187″/Rev)
Cross feeds metric 36 Nos..013-.188″/Rev.or 36 Nos..013-.188″/Rev.or
(32 Nos..014-.380mm/Rev) (32 Nos..014-.380mm/Rev)
Quill diameter 32mm(1-one/4″)(NO.3M.T.)  32mm(1-one/4″)(NO.3M.T.) 
or (optional)
Quill travel  100mm(three-fifteen/16″)(NO.3M.T.)  100mm(3-15/16″)(NO.3M.T.)
or (optional)
Quill taper  NO.3 morse  NO.3 morse
For main motor one.5KW 3PH or 1PH one.5KW 3PH or 1PH

Bench Turning Lathe Machine, Single-Tool Holder CNC Lathe